350 swap
Thread Starter
Member
Joined: Jul 2000
Posts: 179
Likes: 0
From: Lake Oswego, OR, USA
350 swap
Will a 350 out of a 70-78 pickup fit in my car. I mean bolt holes, etc.
------------------
1991 Z28 305 5spd 1LE, TES headers, dual cats, 3 Chamber flowmaster, Comp cams .488/.495 212/218 the usual street racer with a stock chip.
Gained 20HP by porting and polishing my EGR passage.
------------------
1991 Z28 305 5spd 1LE, TES headers, dual cats, 3 Chamber flowmaster, Comp cams .488/.495 212/218 the usual street racer with a stock chip.
Gained 20HP by porting and polishing my EGR passage.
Supreme Member
iTrader: (1)
Joined: Mar 2001
Posts: 1,100
Likes: 0
From: In the corner of my mind!
Car: 1989 TTA #1240
Engine: 3.8 SFI turbo
Transmission: 2004r
Axle/Gears: 3.27
yes just chage the heads and you'll need a diifferent flywheel or flexplate as well as damper evrythiing else is the same
------------------
87 trans am 350 L98 aluminum heads,LT4 hot cam,slp runners,headers,y-pipe,edelbrock base,hi flo cat,air foil,ported plenum,t-5 tranny w/centerforce clutch and a 3.27 9bolt,ads strip chip,relocated iat sensor,hollowed maf
14.10@97mph w/2.01 60'
superram coming soon
------------------
87 trans am 350 L98 aluminum heads,LT4 hot cam,slp runners,headers,y-pipe,edelbrock base,hi flo cat,air foil,ported plenum,t-5 tranny w/centerforce clutch and a 3.27 9bolt,ads strip chip,relocated iat sensor,hollowed maf
14.10@97mph w/2.01 60'
superram coming soon
Thread Starter
Member
Joined: Jul 2000
Posts: 179
Likes: 0
From: Lake Oswego, OR, USA
why would i need new heads?
------------------
1991 Z28 305 5spd 1LE, TES headers, dual cats, 3 Chamber flowmaster, Comp cams .488/.495 212/218 the usual street racer with a stock chip.
Gained 20HP by porting and polishing my EGR passage.
------------------
1991 Z28 305 5spd 1LE, TES headers, dual cats, 3 Chamber flowmaster, Comp cams .488/.495 212/218 the usual street racer with a stock chip.
Gained 20HP by porting and polishing my EGR passage.
Member
Joined: Jul 1999
Posts: 363
Likes: 59
From: Poteau, OK, USA - Age: 44 - AKA 84TAVeRT
Car: 1984 Trans Am Convertible
Engine: 355
Transmission: WCT5
Axle/Gears: 3.73
just slap the 305 heads on there... 
raise compression and still be able to use the stock TPI base...
later,
Chris
raise compression and still be able to use the stock TPI base...later,
Chris
Thread
Thread Starter
Forum
Replies
Last Post