How much would a used set of 89 Corvette L98 aluminum heads sell for on ebay?

------------------
1991 Z28 305 5spd 1LE, TES headers, dual cats, 3 Chamber flowmaster, Comp cams .488/.495 212/218 the usual street racer with a stock chip.
Gained 20HP by porting and polishing my EGR passage.

 

Whatever someone is willing to pay.

I personally wouldn't go more than $450 for a good clean used set.

Make sure they've been checked out or get written guarantee that they will have no problems for 30-90 days.

Be careful.....Ebay people aren't all honest.


------------------
Mike L.
It ain't pretty.......

1987 IROC Z TPI 350 A4 3.27 Borg-Warner.

Mods: 2300-2500 Stall Converter, Shift Kit(GM parts), TPI Specialties Stage 3 PROM, Modified Airbox w/ K&N's, homemade cold air, Relocated MAT sensor, Gutted MAF, 160* thermostat, Accel 8mm Wires, bypassed TB coolant, Flowmaster 3 chamber single 3" in/out muffler, 3" MAC mandrel intermediate, custom dual !cat Y-pipe. airfoil, ported plenum. !smog

http://www.MichaelLasiuta.home.att.net

**BOYCOTT LAPEER DRAGWAY**