Help With Heads
06-10-2005, 10:59 AM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: FLORIDA
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 CAMARO
Engine: 92-350 +.030
Transmission: 86-th400
Axle/Gears: 3.73
Help With Heads
i just got a pair of heads from a friend for free. im wondering if their worth using. casting #3932441, 1970, 350, 1.94 in, 1.5 ex, 76.26 chambers. these specs are the same as my POS 882's. im just wondering because these heads have been ported and polished, screw in studs, push rod guides,new springs, and seals. were these heads good or did someone waste there time ?
06-10-2005, 01:38 PM
#2
Supreme Member
the 441's are one of the better of the '70's smogger heads, first used on the 69 350 255hp.
Their typical street motor potential with porting and 2.02x 1.60 valves is about 390-425 Bhp @10:1 compression and suitable matching parts.
the chambers are nominally 76cc's and can be flat milled to about 69-70cc or angle milled to get 62cc's
If this fits your plans they will work well for ya.
They are a better casting than the 882's.
Their typical street motor potential with porting and 2.02x 1.60 valves is about 390-425 Bhp @10:1 compression and suitable matching parts.
the chambers are nominally 76cc's and can be flat milled to about 69-70cc or angle milled to get 62cc's
If this fits your plans they will work well for ya.
They are a better casting than the 882's.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
92projectcamaro
Engine/Drivetrain/Suspension Parts for Sale
11
01-18-2016 08:00 AM