Hey guys, I bought a 1984 Camaro Z28 as a parts car, paid $50 for it, strong runner but no title. Well I yanked the motor and was going to replace the gaskets to put the motor in my dads Z28, well, I ended up selling the short block and keeping the heads, today I discovered that the valves on the heads are 2.02 / 1.6. These are cast iron heads on what is suppose to be the stock carbureted 305ci v8.

These are the numbers I got off the heads:

outside:

804081
0J5

inside (where valves springs and rockers are)


W S/R
CD8 I-052


Can anyone tell me what these heads are? Did I mistakenly get rid of a 350? Thanks guys.

 

/

 

what is the casting number its in the rocker valley? sorry bout that

 

The numbers I gave are the only ones on the heads, I don't have the block anymore so I don't have the numbers for it.

 

edit: take that back then..

 

got it world products s/r torquer heads. check this out
http://store.summitracing.com/defaul...=400240+303844

 

chevy its not thats the outside labeling that got me too, i cant tell you what motor, it could have been a 305 either way decent heads. you have either a 67cc or 72cc combustion chamber

 

They are definately 2.02 heads, I don't think they are the torquer heads though.

 

w s/r? they sure as H*** aren't gm heads.