Need code 34 and 36 help
Thread Starter
Junior Member
Joined: Sep 2001
Posts: 1
Likes: 0
From: Kearney, Ne, USA
Need code 34 and 36 help
I've already replaced the mass air flow sensor, but I'm still having the service engine soon light with code 34 and 36 showing up.
Any other thoughts?
Any other thoughts?
Moderator
Joined: Jan 2000
Posts: 19,660
Likes: 311
NE,
Welcome Aboard!
You can find a lot of relevant information on the boards by using the SEARCH tool. The archives probably contain hundreds of posts on that very topic.
To save you some time, try removing the MAF power and burnoff relays. Carefully remove the relay covers and inspect/clean the contacts. Or replace the relays for about ten bucks each.
If you had looked at the message archives first, you might have saved the cost of a new MAF. Next time...
------------------
Later,
Vader
------------------
Justice and Freedom will Prevail
[This message has been edited by Vader (edited September 19, 2001).]
Welcome Aboard!
You can find a lot of relevant information on the boards by using the SEARCH tool. The archives probably contain hundreds of posts on that very topic.
To save you some time, try removing the MAF power and burnoff relays. Carefully remove the relay covers and inspect/clean the contacts. Or replace the relays for about ten bucks each.
If you had looked at the message archives first, you might have saved the cost of a new MAF. Next time...
------------------
Later,
Vader
------------------
Justice and Freedom will Prevail
[This message has been edited by Vader (edited September 19, 2001).]
Thread
Thread Starter
Forum
Replies
Last Post
