Had some installation problems with headers. Anyways, they were on, all happy...now...
We broke the coolant sensor (on passenger side, above knock sensor)...no biggie...

But there is a grey, oval-shaped harness on the driver's side, with what seems to be three wires going into it; orange, tan, and another tan/or yellowish wire. I have NO IDEA WHERE THIS GOES. NONE.

The PROBLEM is, the car won't start. Everything else is connected fine, and the car mis/back fires. Smoke rises from the throttle body. Wires are all on correctly, plugs in tight, etc. WHAT THE HELL IS THE PROBLEM? I'm getting no error codes on my scanner. HELP!



------------------
1992 Camaro RS (Auto) 5.0L TBI
-
Performance mods
NOS (125 HP shot)
Dynomax cat-back exhaust
Hedman headers
K & N open element/ X-Stream lid
MSD 6A ignition
MSD 8.5mm plug wires
LT1 camshaft
Soon to be installed:
Edelbrock intake manifold
B & M 2400 RPM stall torque converter
Trans Go shift kit
World Products Torquer heads

Audio
Sony Xplod CDX-M610 head unit
Pioneer 2-way 4x6 front speakers
Pioneer 3-way 6x9 rear speakers
12 inch Pioneer VCCS PRO subwoofer
QLogic sealed box
Kicker ZR360 amplifier
Lightning Audio 1 farad capacitor

Other
Macewen White Faced Gauges/Shift overlay
A-pillar gauges (Phantom oil pressure, Air/Fuel)
180* thermostat
Window Tint

 

I would suggest finding out where those mystery wires go before you try to start it again... Chances are excellent that harness is pretty important.