76mm 4 speed
Thread Starter
Junior Member
Joined: Aug 2004
Posts: 42
Likes: 0
From: long island n.y.
Car: 1982 z28
Engine: lg4
Transmission: saginaw 4 spd
76mm 4 speed
I HAVE A 1982 Z28 WITH THE FACTORY 76MM 4 SPD TRANS AND I WANT TO CHANGE THE FUILD OUT TO SYNTHETIC. I CANT FIND THE DRAIN PLUG. I THINK THE FILL HAS A SQUARE HEAD ON THE PASS SIDE BUT I CANT FIND THE DRAIN. I HAVE CONSULTED MY SHOP BOOK AND IT WAS NO HELP.
THANKS GUYS
THANKS GUYS
Supreme Member
iTrader: (1)
Joined: Jun 2003
Posts: 3,085
Likes: 2
From: Elgin, IL
Car: 1997 Corvette
Engine: LS1
Transmission: 4L60E
Axle/Gears: 2.73 IRS
Typically to drain a transmission, you just unbolt the lower side of the fluid pan and start working your way towards the upper end while prying softly to try and break the seal so fluid starts seeping out.
Are you sure that 4spd can handle synthetic? I don't think most older manuals like synthetics.
Are you sure that 4spd can handle synthetic? I don't think most older manuals like synthetics.
Supreme Member
iTrader: (1)
Joined: Jun 2003
Posts: 3,085
Likes: 2
From: Elgin, IL
Car: 1997 Corvette
Engine: LS1
Transmission: 4L60E
Axle/Gears: 2.73 IRS
So much for me working on only automatics so far. Guess that's good to know before I started looking at the WC T-5 I'm getting asking the guy why its missing the pan 
EDIT: Oh, and press the caps lock key again before you post next.
EDIT: Oh, and press the caps lock key again before you post next.
Thread
Thread Starter
Forum
Replies
Last Post
Elephantismo
Electronics
14
Feb 13, 2019 12:51 AM
