2 msd tech about distibutor
Thread Starter
Member
Joined: Nov 2000
Posts: 261
Likes: 0
From: T-TOWN O,K
2 msd tech about distibutor
mods r in sig
i have a billit distributor part # 8366 from u and i seem 2 b burning up rotors and caps like the spark is 2 great and it is crossing over the terminals. coroding them white color. now i saw is summitt that u make a cap extension that puts the terminals further away i guess to stop this problem?
do u have any ideas or need more info?
thanks j.c hicks
------------------
92 F-BIRd FORMULA T-TOP (WHITEKNIGHT) 5.7L-98,700R4B&MSATURDAY NIGHT
SPECIALTRANS 2500STALL,54MM-AS&M TB-PORTPLENT,LARGETUBRUN,L-98 ALUM. HEADS PORTED CRANE AFPR.45PSI,SMOG PUMP GUTTED,
UNDER PULLEYS K&NCOLD AIR KIT,160THERMO,ELDB HEADERS W/3 1/2 Y PIPE 2 RINO CAT 2 DUMP
MSDDIST,6AL,TAYLOR WIRES
2BLASTERCOIL.ACCELL PLUGS
CUSTOM FASTCHIP BY ED WRIGHT,AUBERN POSI W/ RICHMOND 3.23 AND MOSER AXEL SPLINES CRYGO FROZEN,TUBE FRAME CONNEC,EIBACH PRO.,HOK.LOWER ARMS,PAN,TQ ARM,ALUM. DRV.SHAFT.
PST KIT.1LE BRAKE KIT CROSSED DRILLED ROTORS MANY MORE MODS FORESEEN IN MY ERA!13.38ET @ 107.75MPH
i have a billit distributor part # 8366 from u and i seem 2 b burning up rotors and caps like the spark is 2 great and it is crossing over the terminals. coroding them white color. now i saw is summitt that u make a cap extension that puts the terminals further away i guess to stop this problem?
do u have any ideas or need more info?
thanks j.c hicks
------------------
92 F-BIRd FORMULA T-TOP (WHITEKNIGHT) 5.7L-98,700R4B&MSATURDAY NIGHT
SPECIALTRANS 2500STALL,54MM-AS&M TB-PORTPLENT,LARGETUBRUN,L-98 ALUM. HEADS PORTED CRANE AFPR.45PSI,SMOG PUMP GUTTED,
UNDER PULLEYS K&NCOLD AIR KIT,160THERMO,ELDB HEADERS W/3 1/2 Y PIPE 2 RINO CAT 2 DUMP
MSDDIST,6AL,TAYLOR WIRES
2BLASTERCOIL.ACCELL PLUGS
CUSTOM FASTCHIP BY ED WRIGHT,AUBERN POSI W/ RICHMOND 3.23 AND MOSER AXEL SPLINES CRYGO FROZEN,TUBE FRAME CONNEC,EIBACH PRO.,HOK.LOWER ARMS,PAN,TQ ARM,ALUM. DRV.SHAFT.
PST KIT.1LE BRAKE KIT CROSSED DRILLED ROTORS MANY MORE MODS FORESEEN IN MY ERA!13.38ET @ 107.75MPH
Member
Joined: Jun 2000
Posts: 157
Likes: 0
From: NY, NY
You need to check the rotor phasing and maybe use a vented cap. is the corrosion white or a orange/rust color?
------------------
BBC powered 82 firebird.
Street driven (barely) Best ET no nitrous: 9.42 @142mph , Fogger installed, shooting for low 8s this year
------------------
BBC powered 82 firebird.
Street driven (barely) Best ET no nitrous: 9.42 @142mph , Fogger installed, shooting for low 8s this year
Supreme Member
Joined: Mar 2001
Posts: 2,047
Likes: 0
From: The State of Hockey
Car: 1987 Trans Am GTA
Engine: Miniram'd 383, 24X LS1 PCM
Transmission: TH700R4, 4200 stall
Axle/Gears: 9", 4.33:1
<font face="Verdana, Arial" size="2">Originally posted by 9.0L Firebird:
</font>
</font>
------------------
1987 GTA L98 MD8
355, TFS Heads, LT4 Hot Cam
My GTA
The Minnesota F-body Club
Thread Starter
Member
Joined: Nov 2000
Posts: 261
Likes: 0
From: T-TOWN O,K
its white.
now i just put in a new msd cap (3rd one in 10,000 miles,plus rotor ) and its got build up already? i used msd spark guard direlic grease and new rotor WTF. MAN I JUST MIGHT GO BACK 2 STOCK?
------------------
92 F-BIRd FORMULA T-TOP (WHITEKNIGHT) 5.7L-98,700R4B&MSATURDAY NIGHT
SPECIALTRANS 2500STALL,54MM-AS&M TB-PORTPLENT,LARGETUBRUN,L-98 ALUM. HEADS PORTED CRANE AFPR.45PSI,SMOG PUMP GUTTED,
UNDER PULLEYS K&NCOLD AIR KIT,160THERMO,ELDB HEADERS W/3 1/2 Y PIPE 2 RINO CAT 2 DUMP
MSDDIST,6AL,TAYLOR WIRES
2BLASTERCOIL.ACCELL PLUGS
CUSTOM FASTCHIP BY ED WRIGHT,AUBERN POSI W/ RICHMOND 3.23 AND MOSER AXEL SPLINES CRYGO FROZEN,TUBE FRAME CONNEC,EIBACH PRO.,HOK.LOWER ARMS,PAN,TQ ARM,ALUM. DRV.SHAFT.
PST KIT.1LE BRAKE KIT CROSSED DRILLED ROTORS MANY MORE MODS FORESEEN IN MY ERA!13.38ET @ 107.75MPH
now i just put in a new msd cap (3rd one in 10,000 miles,plus rotor ) and its got build up already? i used msd spark guard direlic grease and new rotor WTF. MAN I JUST MIGHT GO BACK 2 STOCK?
------------------
92 F-BIRd FORMULA T-TOP (WHITEKNIGHT) 5.7L-98,700R4B&MSATURDAY NIGHT
SPECIALTRANS 2500STALL,54MM-AS&M TB-PORTPLENT,LARGETUBRUN,L-98 ALUM. HEADS PORTED CRANE AFPR.45PSI,SMOG PUMP GUTTED,
UNDER PULLEYS K&NCOLD AIR KIT,160THERMO,ELDB HEADERS W/3 1/2 Y PIPE 2 RINO CAT 2 DUMP
MSDDIST,6AL,TAYLOR WIRES
2BLASTERCOIL.ACCELL PLUGS
CUSTOM FASTCHIP BY ED WRIGHT,AUBERN POSI W/ RICHMOND 3.23 AND MOSER AXEL SPLINES CRYGO FROZEN,TUBE FRAME CONNEC,EIBACH PRO.,HOK.LOWER ARMS,PAN,TQ ARM,ALUM. DRV.SHAFT.
PST KIT.1LE BRAKE KIT CROSSED DRILLED ROTORS MANY MORE MODS FORESEEN IN MY ERA!13.38ET @ 107.75MPH
Thread
Thread Starter
Forum
Replies
Last Post
RedLeader289
Tech / General Engine
10
May 28, 2019 01:47 PM