Fully Ported stock 86 TPI 305 heads?
Thread Starter
Member
Joined: Mar 2001
Posts: 271
Likes: 0
From: Oregon, WI US
Fully Ported stock 86 TPI 305 heads?
I have been looking at all my options and do not have the $$$ to spend to get even s/r torqers or L98 vette heads, so this is my last option. I can get a real good deal on this like $100 fully ported. I am running a fully ported TPI setup(intake, plenum, and runners) with a Comp cam Xtreme energy 206/212dur, .487/.495lift and 110lsa. Do you think these heads will provide enough flow for this cam and from the intake? Give me some opinons on this please!!!!!
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
It's real hard to say what might be meant by "fully ported"... but they should be OK no matter what, if they're one of the better 305 castings such as 416 (the stock ones for 86 TPI).
------------------
"So many Mustangs, so little time..."
ICON Motorsports
------------------
"So many Mustangs, so little time..."
ICON Motorsports
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
Dec 2, 2016 06:33 PM
drathaar907
History / Originality
4
Aug 10, 2015 07:44 AM
