help with intake reseal
Thread Starter
TGO Supporter
Joined: Nov 2001
Posts: 399
Likes: 0
From: Columbus, OH
Car: '02 Rodeo
Engine: 3.2 V6 DOHC
Transmission: 5spd
Axle/Gears: 4.30 Dana 44 Rear 10 bolt front
help with intake reseal
i have a 91 Z w/ the 305 tpi motor
i noticed that my intake is leaking coolant
can anyone direct me to a site were i can
get detailed instructions on this repair
i have assisted with this repair on a 3.1
sfi motor. any help would be appreciated
i noticed that my intake is leaking coolant
can anyone direct me to a site were i can
get detailed instructions on this repair
i have assisted with this repair on a 3.1
sfi motor. any help would be appreciated
TGO Supporter
Joined: Aug 1999
Posts: 14,811
Likes: 1
From: Jackson County
don't know of any sites but you might be ahead to just buy a manual and it should have all the info you need in it.
------------------
ICON Motorsports
1st & 3rd
MM Black Diamond 538 F&AM
------------------
ICON Motorsports
1st & 3rd
MM Black Diamond 538 F&AM
Junior Member
Joined: Aug 2001
Posts: 14
Likes: 0
From: Seattle, Wa USA
I had the same prob a while back and did it myself with a book. Its not difficult but you have to pay attention to all the wires and hoses you unhook just to get there not to mention the FuelRails etc.. Before I started I took a couple close up polaroids and used my Vid camera so I could double check some things as I put it back together.
Thread
Thread Starter
Forum
Replies
Last Post
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
3
Sep 10, 2015 07:31 AM
e3pres
Engine/Drivetrain/Suspension Parts for Sale
1
Sep 9, 2015 01:51 PM
