Couple Qs for the 350 build
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Originally posted by Sonix
in my search for that lunati 60103 cam, I found:
summit, $110 USD + shipping, border fee/duty + 4-6 weeks wait
Bumper to bumper - $170CA +tax, not sure on wait time
MOPAC - $135CA+tax, ~3 weeks wait.
So it looks like MOPAC is actually the winner here, bonus to that is easy to return if something goes wrong.
in my search for that lunati 60103 cam, I found:
summit, $110 USD + shipping, border fee/duty + 4-6 weeks wait
Bumper to bumper - $170CA +tax, not sure on wait time
MOPAC - $135CA+tax, ~3 weeks wait.
So it looks like MOPAC is actually the winner here, bonus to that is easy to return if something goes wrong.
Supreme Member
Joined: Sep 2001
Posts: 6,111
Likes: 53
From: Ontario, Canada
Car: 1988 Firebird S/E
Engine: 406Ci Vortec SBC
Transmission: TH-350/3500stall
Axle/Gears: 7.5" Auburn 4.10 Posi-Traction
The cam is too big for a stock stall.
Needs a 2800stall and a 3.73-4.10 rear gear.
Lunati #06109 or #60101 camshaft is a much better choice with a stock stall converter.
Lunati #73943 are the right replacement spring for either cam. No machining required.
Replace the 305 head's exhaust rotator type retainers with 8 stock type retainers and install a 3 shim pack (valve spring seat shim) (.015+.030+.060) on each exhaust spring seat on the 305 heads.
Needs a 2800stall and a 3.73-4.10 rear gear.
Lunati #06109 or #60101 camshaft is a much better choice with a stock stall converter.
Lunati #73943 are the right replacement spring for either cam. No machining required.
Replace the 305 head's exhaust rotator type retainers with 8 stock type retainers and install a 3 shim pack (valve spring seat shim) (.015+.030+.060) on each exhaust spring seat on the 305 heads.
Supreme Member
iTrader: (1)
Joined: Jul 2004
Posts: 10,763
Likes: 4
From: Calgary, AB, Canada
Car: 1982 Trans-Am
Engine: 355 w/ ported 416s
Transmission: T10, hurst shifter
Axle/Gears: 10 bolt, true-trac, 3.73
huh, didn't know where they were, so I googled it,
There's an online canadian forum for hi-perf in general, one board is soley high performance's shop, you post a part, and they give a price... wow.http://www.performance-shop.com/yabb...347;board=55.0
There's an online canadian forum for hi-perf in general, one board is soley high performance's shop, you post a part, and they give a price... wow.http://www.performance-shop.com/yabb...347;board=55.0
Thread
Thread Starter
Forum
Replies
Last Post
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
Sep 2, 2015 02:45 PM
