Need Help With Cut Wires
Thread Starter
Junior Member
Joined: Nov 2005
Posts: 29
Likes: 0
Car: 1983 Pontiac Trans Am
Engine: 305 Crossfire V8
Transmission: Autotragic
Need Help With Cut Wires
After changing my intake manifold gasket, I realized I have a bunch of cut wires behind the manifold.
I have a brown and black wire that is cut that goes to a sensor behind the block on the passenger side. I believe is the knock sensor.
Also I have 3 wires look like purple blue and tan/black. These are also cut behind the mani. BUT I HAVE the same wires hanging below the car from the tranny. I am missing the 8 ft length though.
I believe this for the tranny because it doesnt shift into third or fourth and is being a **** head.
I have a brown and black wire that is cut that goes to a sensor behind the block on the passenger side. I believe is the knock sensor.
Also I have 3 wires look like purple blue and tan/black. These are also cut behind the mani. BUT I HAVE the same wires hanging below the car from the tranny. I am missing the 8 ft length though.
I believe this for the tranny because it doesnt shift into third or fourth and is being a **** head.
Thread
Thread Starter
Forum
Replies
Last Post
db057
TBI
10
Aug 11, 2015 10:11 PM