L69 cam options???
Thread Starter
Banned
Joined: Sep 2000
Posts: 1,940
Likes: 2
From: Glendale, AZ
Car: 4 Mopars total
Engine: Pentastar power
Transmission: T/F and New Process
Axle/Gears: Three 8 3/4's & one 9 1/4
L69 cam options???
Whats a good cam to upgrade an L69 305? The only mods are a Weiand "action plus" intake manifold, Edelbrock TES headers and the stock L69 catback with a "chokemaster" muffler. The car already has 3.73 gears being an H.O. car. BTW, its an automatic. Ive heard of some guys getting these L69's running in the mid 14 range, if not a little quicker. Let me know what you guys think. Id like to order the cam in a couple days if I can figure out which one would be a good choice. THX
Supreme Member
iTrader: (4)
Joined: Oct 1999
Posts: 4,211
Likes: 3
From: GO PACK GO
Car: 83Z28 HO
Engine: Magnacharged Dart Little M 408
Transmission: G Force 5 speed
Axle/Gears: Moser 9" w/Detroit Trutrac
I used a Crane Compucam 2040 and noticed a real SOTP improvement, but never put it on a dyno or got times...
But it worked great with the CCC system. I also ran a Weiand Action plus, TES headers and a Hooker Catback.
But it worked great with the CCC system. I also ran a Weiand Action plus, TES headers and a Hooker Catback.
Thread Starter
Banned
Joined: Sep 2000
Posts: 1,940
Likes: 2
From: Glendale, AZ
Car: 4 Mopars total
Engine: Pentastar power
Transmission: T/F and New Process
Axle/Gears: Three 8 3/4's & one 9 1/4
Thats interesting. That is actually one of the cams I was looking into. I ran it in a 350 a few years back and was quite pleased with it. Its good to know someone else actually ran one in one of these motors and had good results.
Thread
Thread Starter
Forum
Replies
Last Post
