Too low a stall.
Thread Starter
Junior Member
Joined: Apr 2005
Posts: 23
Likes: 0
Car: 86 Z28
Engine: 383
Transmission: Built 700r4
Too low a stall.
This question is for a friend who is buying a car:
He's buying a 3rd gen TA with a carbed built 350.
The car requires a stall of around 3000+ but its tranny took a dump and the new one has a stall of around 2000, he can't afford to get the new stall yet and wants to know what "damage or loss of power" he should expect.
The tranny is a 700r4.
He's buying a 3rd gen TA with a carbed built 350.
The car requires a stall of around 3000+ but its tranny took a dump and the new one has a stall of around 2000, he can't afford to get the new stall yet and wants to know what "damage or loss of power" he should expect.
The tranny is a 700r4.
Supreme Member
iTrader: (5)
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
a very poor response below the recommended stall speed, but should be able to drive it, just don't expect it to run as well as it can.
Thread
Thread Starter
Forum
Replies
Last Post
Damon
Tech / General Engine
8
Sep 26, 2015 04:29 PM