I put some Hedman hedders on my 86' berlinetta some time ago, and now i'm getting to the point where i'm putting everything back together. I was just wondering if all the mounting brackets will still fit with the new headers. Also, i was wondering if anyone had some pictures of the v-belt/mounting bracket configuration for the motor.. any help would be greatly appreciated.

Eddie.

 

You'll need to screw with the power steering mount. One nut goes onto the exhaust manifold stud, front, drivers side. Since your headers don't use that, you can do like I did, and use some threaded rod, and a nut to hold the header on, then another 2 nuts to mount the power steering pump bracket in place, about 1" further out on the threaded rod.
Here, I'm pretty sure my old thread will help you out:

https://www.thirdgen.org/forums/tech...light=brackets

oh, heed the note about the smog bracket bolt (!)

 

yay