Need opinion on roller rockers (pictures inside)
Thread Starter
Supreme Member
iTrader: (1)
Joined: Jun 2006
Posts: 1,067
Likes: 0
From: Guelph, Ontario
Car: 89 IROC/05 RX8
Engine: LS1/LS1
Transmission: T56/T56
Axle/Gears: 3.42 GM/3.55 8.8
Need opinion on roller rockers (pictures inside)
Hey Everyone,
Ive got the opporotunity to buy this set of Crane Gold series rockers for $75cdn.
They are used, and have been fitted, but i am un sure whether this damage will affect future performance.
Letme know what you think:


Ive got the opporotunity to buy this set of Crane Gold series rockers for $75cdn.
They are used, and have been fitted, but i am un sure whether this damage will affect future performance.
Letme know what you think:


Supreme Member
Joined: Sep 2001
Posts: 6,111
Likes: 53
From: Ontario, Canada
Car: 1988 Firebird S/E
Engine: 406Ci Vortec SBC
Transmission: TH-350/3500stall
Axle/Gears: 7.5" Auburn 4.10 Posi-Traction
Those rockers have seen a hard life. They are all used up.
PASS , even if they are free. Here are some fairly decent aluminum rockers from Summit for a fair price.
http://store.summitracing.com/partde...5&autoview=sku
Here is a good deal. these Crane "Blue Racer" rocker arms are the same as the $$$ Gold race $$$ without the gold anodizing. For a lot less. these are not the cheap(er) heavy 'Energizer" series.
Notice the Wolverine Blue racer Series part number.
They are sometimes refered to as the "Engine Builders Rocker Arm",, as they are the real-deal Crane rockers without the high price and gold finish.
Thats a good deal.
http://store.summitracing.com/partde...5&autoview=sku
I also recomend Scorpion Brand rocker arms. they are as bullit proof as an aluminum rocker arm gets and have a lifetime warranty. If you can break one you're doing someting wrong. like what ever happended to the abused rockers in your pics. price is right too. just make sure your getting genuine Scorpion rockers, not some knockoff.
PASS , even if they are free. Here are some fairly decent aluminum rockers from Summit for a fair price.
http://store.summitracing.com/partde...5&autoview=sku
Here is a good deal. these Crane "Blue Racer" rocker arms are the same as the $$$ Gold race $$$ without the gold anodizing. For a lot less. these are not the cheap(er) heavy 'Energizer" series.
Notice the Wolverine Blue racer Series part number.
They are sometimes refered to as the "Engine Builders Rocker Arm",, as they are the real-deal Crane rockers without the high price and gold finish.
Thats a good deal.

http://store.summitracing.com/partde...5&autoview=sku
I also recomend Scorpion Brand rocker arms. they are as bullit proof as an aluminum rocker arm gets and have a lifetime warranty. If you can break one you're doing someting wrong. like what ever happended to the abused rockers in your pics. price is right too. just make sure your getting genuine Scorpion rockers, not some knockoff.
Last edited by F-BIRD'88; Dec 19, 2006 at 06:01 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
Sep 2, 2015 02:45 PM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
Aug 20, 2015 09:36 PM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM
IrocZ'85
Engine/Drivetrain/Suspension Parts for Sale
0
Aug 17, 2015 06:24 PM





