I cant find a set of new fuel injectors under $300 for nothing...

I need a set of 22 lb injectors badly, and all I can find are 21, 23, 24, and everything else, but not what I need....

I need a link to some kind of aftermarket injectors, im about to go crazy.

I would just go to 24 lb injectors, but I dont have the money to have the chip re-tuned.

 

21lbs are just 22lbs injectors at a lower pressure reading. They'll work fine. 23lbs are either 22lbs at a higher pressure, or 24lbs at a lower pressure. Get the 21lbs and you wont have to reburn the chip.

 

Even with a modified engine?

 

Define modified. A custom chip will benefit any engine that is changed from stock. But the factory tune can usually handle bolt-ons. Its a camshaft and head swap or larger injectors that will give you trouble.

 

MSD Ignition
Edelbrock Headers
Bored .30 Over
Comp Cams .500/.510 Lift Camshaft
Ported, And Polished Heads
Ported Intake Manifold
Flat Top Pistons
Custom Burned PROM
ACCEL 8.8 Wires
Custom Porting To TPI Plenum
K&N Air Filter

The engine only has about 2800 miles on it, it had a complete tear-down and rebuild just under a year ago. About the only thing original is the block....and the injectors

There has been a couple other things done to up power, but those are the actual "mods" to the engine

 

i have a set of used injectors, 22lbs that i had in my car for a while and had no problems with them. dont know if your interested in used or not but if so pm me for more details

 

Who did the custom prom?

Do you have an adjustabe fuel pressure regulator? As I said, you can use the 21lbs with the pressure at 42-46lbs, or the 23lbs with the pressure at 38-42lbs.