Because you all know thats where the "Well I didn't know what to get you...." money is going!

For me its Super 44's, B&M shifter, Tach, headlight bushing kit, and a full tank of gas!

 

I just bought a 350 2 bolt block for my baby. Going to turn it into a 383 monster :-D

 

hmm picked up a return regulator today, going to order some parachute stuff...and some new lower arms for the rear (I already built the engine lol, I can put it on the rear bumper at will now so power isnt a problem lol)

 

Xmas came early. I just did a 4th gen rear wing & side mirror swap! Next is a RA I hood!

 

getting AFR heads, comp cam, waterpump, and extras

 

Im going to give my car its dash back. Had a fire under there in the wires, and pulled it out.

 

Something good...dont know what yet. I did just get an LT1 starter. And I will get another dash pad soon.

 

im thinking shift kit, L98 w/ 383 rotating assy (as soon as i pick one), C4 HD brakes, and maybe a full exhaust..

poor girl is still stock!



~LMSkyliner

 

the spoiler looks good! how hard was the swap? I'm thinking of doing it myself!

I always pull out bahahaha

joking. hope everything turns out good =]

I know the feeling!

 

A year's worth of work, research, and part collecting is finally starting to come to a head for me.

All of this has happened within the last 3 weeks


Koni yellow Sport Adjustables all around + IROC springs too


Long tubes + duals


Vortec headed 350 with xe262 cam. It's not in the car yet... gonna be getting my sub frame connectors in soon, then it's just a matter of buying some nickel and dime parts to get the 350 in.

I'm excited.

And those two wheels in the last pic are polished up real nice... I'm gonna get some rubbert put on 'em and polish the two that come off the car to have a full set of polished wheels. Should look mighty fine!

 

It's been Christmas for the past 12 months for my toy. I think i'll give it the credit card bill.

 

i'm getting my Z a new 4150 hp carb to replace my current pos got agreat deal on ebay for 250

 

Mine got sloted rotors for the front,wilwood disc brake set up for the rear and an upgrade to 5/8 wheel studs. And a new set of 275-60-15 drag radials.

 

LS1/T56. Aluminum driveshaft. 145 MPH speedo. 3.42 gears.

 

I'm going with a new camshaft and valve springs. Then on to the dyno tune.

 

Rebuilt short block, Comp XE roller, new valve train, straight pipe with a maximum flow "muffler" (neighbors should love that one) and finish installing SFCs and fixing collision damage.

 

350 4-bolt main.030 over, comp cam 218/224/ duration with 462/469 valve lift at .50, 461 heads ported and polished with an edelbrock torker intake and edelbrock600 cfm carb. Going in Christmas eve.

 

I promised my wife that I wouldn't by myself anything for the car. But, I can't wait untill she opens a couple of her presents and finds some supercharger stuff.. Since she won't know what it will go to, I will have to take it off her hands.. LOL

 

2460-1HKR Hooker Headers, Custom Y-Pipe, New Seatbelts, 145MPH Speedo, New Tires, New Weatherstripping, Custom Shaved Door Remote Kit.

 

that's funny I am in the same boat.

 

Try it, and you might be in a different house. . .

 

My car is getting surgery to fix an oil leak from the intake base / engine block juncture.....
Then, hopefully a dyno-tune in the near future .

Bill

 

mine got a line-lock installed. i'm gonna start collecting parts soon for my camshaft swap. putting full stainless steel 1.94/1.5 valves in the 416's, some more porting work, a solid camshaft, and hopefully an 11 second timeslip

 

well mine got her's today . black euro cut turn/park lite housings . before i installed them , i put small red bordered/white centered chevy bowties on the center of each . i have an IROC bowtie grill , center is also white , as is the rest of the car . soon to have silver/gray GFX with red accent stripe . i like the results and think they will all tie together very nice . will try to post a pic. later .

 

Well, if I am right, I am probably gonna need a new trans. Merry fing xmas GP.

 

The heads I'm looking at are $1400

 

+1

mines not getting anything for christmas, enough work and money for this year.

 

Hopefully I am getting her a sister, it's an 89 Iroc that a neighbor owns that just sits there in pristine condition. I am working on him and I think he is about to break

 

Nothing, I gave it a paint job this year.

 

new suspension would be nice. Mines only 20 years old. I can feel every bump in the road.

 

man, that's kind of a mismatched combo there big guy...i don't know if that's gonna perform like you think it might.

 

supercharged 383 tranny subframe connecters autometer gauges new rear end Merry christmas camaro or me a little of both i guess

 

mine will be a late christmas for my car due to gift for other people 1st.
but ill be getting her a nice engine upgrade from the 305 to a 383 she will feel the love

 

I know the carb is small, but i just made this engine from stuff i had laying around. Any suggestions, what do you think is mismatched about it? I'm all for constructive criticism! PM me plz!

 

cam, rockers, 8pt cage, sfc's, and another camaro lol. im picking up a good condition 84 z28 without a engine and trans for $315 for a parts car.

 

some 91-92 tailights hopefully, gfx painted, exhaust, new badges, and some tlc that she desperately needs

 

355 or 383 engine. already had the block bored, cleaned, new freeze plugs, and cam bearings. Just need to choose the rotating assembly and get the rest of the small parts.

 

Mine has had Christmas all year. New engine in February, new springs in March, new long tubes in April, new gears in May, new brakes in July and now she is throwing a tantrum and wants to run like crap. I think I have spoiled my car too much.

 

I found that out yesterday too my 700r4 took a crap. Oh well, can you say t56

I'm still getting all the other stuff though! +1 for January babies ^_^

 

For mine: a car wash.

Haha. Want to get a new coil, TPI airfoil...nothing expensive.

 

can we count things we bought for ourselfs. if so here goes:

moser 12 bolt
sphon panhard rod with heim ends
12 pt cage
frame ties
357" turbo motor, with afr heads,
t88 turbo
5 " exh
and some misc 3.5" intercooler plumming
intercooler,
turbonetics new gen wastegate
and godzilla bov
thats my list so far i got a lot left to get
anyone wana buy me a sphon tq arm with tranny mt for a th 400. or have a used one for sale?
and a good k memeber for the front.
merry christmas

 

Thinking about a hollow 36MM sway bar. and maybe a posi. Dunno yet

 

my son gave his a new flexplate, his cracked ,later jimmy

 

new tires, brakes, and a shift kit.

 

NEW 17 INCH WHEELS!!!! Its been Christmas all year at my garage,lol

 

Quickfuel carb
install the suspention finnally for the rear
SFCs
Custom 8.8 install
adjustable TA
Stock catback + E cut out
maybe try and fit a set of 315/60/15's lol
Sep fuel cell for the bottle

 

7oz of stabil

 

Damn, very creative man...!

 

383, heads, headers, BMR adjustable T/A, well all kind of stuff, well at least 6k worth of stuff......

 

New q-jet, K&N re-charge kit, MSD wires, ac-delco rapid fire plugs and collant flush. all done today cars running alot better and alot smoother! merry christmas to the camaro damn my gf doesnt even have anything yet hahaha.