Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

Sponsored by:

float bowls need help

Reply Subscribe

Search this Thread

Old

Mar 6, 2008 | 11:15 PM

#1

Thread Starter

Junior Member

Joined: Aug 2007

Posts: 8

Likes: 0

float bowls need help

i have a edelbrock 600 cfm carb were are the float bowls located how do i acccsess them to clean them

Old

Mar 7, 2008 | 08:22 AM

#2

Moderator

iTrader: (1)

Joined: Mar 2002

Posts: 18,432

Likes: 234

From: Chasing Electrons

Car: check

Engine: check

Transmission: check

Re: float bowls need help

They are on the sides of the carb. Remove the rod & piston assemblies, disconnect the accel pump rod, remove top cover screws. Carefully lift top cover off. Note that the floats will be attached to the top cover.

You may want to check/set the float levels and the float drop while the lid is off.

RBob.

Old

Mar 7, 2008 | 09:58 AM

#3

Thread Starter

Junior Member

Joined: Aug 2007

Posts: 8

Likes: 0

Re: float bowls need help

thanks ill let u no how it went

Reply Subscribe

Related Topics

Thread

Thread Starter

Forum

Replies

Last Post

loss of power after 4000 RPM's

pjsparts

Tech / General Engine

11

Oct 29, 2025 06:39 PM

vapor lock at the track

13sec83trans

Carburetors

22

Nov 28, 2015 09:26 PM

Mechanical Fuel Pumps: Edelbrock vs Carter

skinny z

Carburetors

11

Sep 29, 2015 11:25 PM

Fuel level rheostat/pot replacement part number

Springster

Tech / General Engine

2

Sep 13, 2015 01:38 PM

Previous Engine Swap = Current Starter Issues

Formula_88AE

Engine Swap

1

Sep 3, 2015 01:47 PM

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 11:35 PM.