is there anyway i run a nitrous line off the test port and a fuel pressure gauge? or any otherway to make this combo work?

you mean the fuel line that comes off the rail that feeds gas for the nitrous setup?

yeah..i did it...just add a gauge somewhere on the fuel line.

i thought the fuel pressure gauge just screws on the test port with no way to t-off it? do u have any pics of your setup

here's a picture of my setup..is this what your talking about?

I got the braided line coming from the fuel rail port to the fuel solenoid of the nitrous setup. I just added the gauge where you see it.





and it seems to work fine.

it looks good. it looks like you have some type of 3-way adapter? am i wrong, wat type of gauge is that?

yeah it was an adapter that I got from NX...I also used to have their fuel pressure gauge but it ended up breaking and wouldnt show the correct reading cause it jumped around to much....so I ended up getting a water filled gauge off ebay....that keeps the needle nice and still when the motor is running.