power steering bracket question
Thread Starter
Junior Member
Joined: Apr 2008
Posts: 56
Likes: 0
From: Michigan
Car: 1985 Trans Am
Engine: built 355
Transmission: th350
Axle/Gears: Borg warner 3.08's
power steering bracket question
Im buying a 350 out of a 93 van. I cant use the power steering pump because it has a different reservoir its connected to a hose that runs up and bolts under the hood. My question is can i put a truck pump on the van bracket or do i have to get the bracket out of a truck? Do all sbc power steering pump have the same bolt pattern?
Joined: Mar 2000
Posts: 43,187
Likes: 43
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Patience, Grasshopper. We can't all be on line when you are. . .
The simplest solution would be to use your stock accessories, assuming you currently have a V8. If you want to use the truck steering pump, just mount the reservoir somewhere. I believe, though, without being able to confirm it with my own equipment, that the pumps use the same mount bolt pattern (my '95 diesel truck has the built-in reservoir).
The simplest solution would be to use your stock accessories, assuming you currently have a V8. If you want to use the truck steering pump, just mount the reservoir somewhere. I believe, though, without being able to confirm it with my own equipment, that the pumps use the same mount bolt pattern (my '95 diesel truck has the built-in reservoir).
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
colton_carlson
Firebirds for Sale
7
Mar 8, 2019 12:21 PM
