350 swap start up
Thread Starter
Junior Member
Joined: May 2008
Posts: 48
Likes: 0
From: Bay Area
Car: 83 Camaro
Engine: 5.0
Transmission: T-5
Axle/Gears: 3.73 open
350 swap start up
any tips do's dont's on the first start up of my project its a used non rebuilt 350 under all stock lg4 components cc carb dist smog equp all that ''good stuff'' thanx for info
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Make sure it has oil and water. Check for leaks all around and under before and as soon as it starts. Set the timing as soon as you're done checking for leaks.
Thread Starter
Junior Member
Joined: May 2008
Posts: 48
Likes: 0
From: Bay Area
Car: 83 Camaro
Engine: 5.0
Transmission: T-5
Axle/Gears: 3.73 open
Re: 350 swap start up
thanx quick question im putting a new oil pump on and not priming it till its all togeather then disable the dist and crank it till i get oil out the rockers would that be alright way of doing it
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
