New Carb And Intake......Ok With A Stock Cam?
Thread Starter
Junior Member
Joined: Dec 2008
Posts: 3
Likes: 0
New Carb And Intake......Ok With A Stock Cam?
Hi i own a 83 cutlass supreme with a 305 and i recently bought a edelbrock 650 thunderseries carb and a edelbrock performer air gap intake just wondering if they'll be fine with a stock cam?"
Junior Member
Joined: Feb 2007
Posts: 42
Likes: 0
From: Warner Robins, Ga.
Car: 91 Camaro
Engine: 305
Transmission: T-5
Axle/Gears: 3.23 limited slip from 91 Z28
Re: New Carb And Intake......Ok With A Stock Cam?
It should run better than the stock carb and intake. Granted a larger cam would take advantage of your new setup. The original LO3 that was in my car woke up when I put an Edelbrock performer intake and Holley 570 S/A carb.
Supreme Member
Joined: Apr 2006
Posts: 1,801
Likes: 21
From: Rochester NY
Car: 1984 z28
Engine: 355
Transmission: 700r4
Axle/Gears: Moser 9" 4.11
Re: New Carb And Intake......Ok With A Stock Cam?
You should of went with the performer intake and left it at that unless you plan on modding the motor in th future.
Senior Member
Joined: Jun 2005
Posts: 502
Likes: 0
From: Savannah GA
Car: 1986 IROC
Engine: 355" TPI
Transmission: 700R4
Axle/Gears: 3.42
Re: New Carb And Intake......Ok With A Stock Cam?
It will be fine but you will need to dump the stock distributor. If I had the extra money I would buy a really cheap cam to run with the new carb and intake.
Thread Starter
Junior Member
Joined: Dec 2008
Posts: 3
Likes: 0
Re: New Carb And Intake......Ok With A Stock Cam?
ya i will be doing some more mods in the future, including new cam and heads, just dont have the extra money at the moment but definetly will go get a new distributor.
Thanks for the help!
Thanks for the help!
Thread
Thread Starter
Forum
Replies
Last Post
