Help with AFR 195's
Thread Starter
Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 645
Likes: 2
From: Houston,TX
Car: 92 RS/90' vette
Engine: Heads/cam/miniram/blah blah blah..
Transmission: T5/700!
Axle/Gears: 3.08
Help with AFR 195's
I seem to have a problem with the thread depth on the heads. The valvecover bolts stop about 1/4 inch from the top of the cover. (centerbolt)
My bolts for my P/S pump bracket do the same on the front of the head, they bottom out about 1/4 inch shy of contact with the bracket.
What gives?
My bolts for my P/S pump bracket do the same on the front of the head, they bottom out about 1/4 inch shy of contact with the bracket.
What gives?
Thread
Thread Starter
Forum
Replies
Last Post
355tpipickup
Tech / General Engine
5
Sep 28, 2015 05:50 PM