Quick question on Fuel Pressure Reg.
Thread Starter
Joined: Oct 2005
Posts: 199
Likes: 0
From: East Helena, MT
Car: 91 RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: Factory 2.73 (unfortunately)
Quick question on Fuel Pressure Reg.
I searched an didn't find anything that answered this question. I am going to put on an adjustable pressure regulator with the adapter and gauge. How do I adjust the pressure? Is it set at idle or wot or what?
Thanks,
RS
Thanks,
RS
Supreme Member
iTrader: (3)
Joined: May 2008
Posts: 1,116
Likes: 1
From: boise, ID
Car: 91 B4C "police special service"
Engine: L98 494hp
Transmission: tko-600 on order
Axle/Gears: 3.23 true trac
Re: Quick question on Fuel Pressure Reg.
it is set at idle, with the vacuum line off...set to 43.5psi...there little screw head on the end of where you hook your vacuum line to...you turn that to adjust pressure...
Thread Starter
Joined: Oct 2005
Posts: 199
Likes: 0
From: East Helena, MT
Car: 91 RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: Factory 2.73 (unfortunately)
Re: Quick question on Fuel Pressure Reg.
Great, thank you 91, but are you talking about TPI? I have a TBI, I thought that the pressure should be set at 12 psi?
I'm confused....
I'm confused....
Last edited by Rally Smith; Apr 17, 2009 at 01:55 PM.
Thread Starter
Joined: Oct 2005
Posts: 199
Likes: 0
From: East Helena, MT
Car: 91 RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: Factory 2.73 (unfortunately)
Re: Quick question on Fuel Pressure Reg.
Is there a way to tell what pressure I should set it at with the winald program on my laptop? Or is there an easier/better way to do that?
Thanks,
Thanks,
Thread
Thread Starter
Forum
Replies
Last Post
R3500
Engine/Drivetrain/Suspension Wanted
1
Aug 17, 2015 12:16 PM
