What valve springs do i get please help!!
Thread Starter
Member
iTrader: (3)
Joined: Jul 2009
Posts: 490
Likes: 0
Car: 1990 Camaro RS
Engine: 350 Vortec Demon 650CFM
Transmission: 700R4
Axle/Gears: Posi
What valve springs do i get please help!!
I just bought a cam and i am going to need new valves springs i just dontknow what size to get here are the cam specs
Performance hydraulic flat tappet camshaft and lifter kit for Chevrolet small block 283-305-327-350-400. P/N Camshaft 22213; Lifter B-0817. Kit includes Melling M-Select camshaft and lifters. Melling describes this cam as a Class II with fair idle and good low to mid-rande torque. Cam specs are as follows:
ADV. Duration (INT/EXH): 288 / 288
Duration @ .050" (INT/EXH): 214 / 214
Valve Lift (INT/EXH): .443 / .443
Lobe Centerline: 112
Power Range: 1700-5200
Please let me know the right springs to use on my LB9 heads
Performance hydraulic flat tappet camshaft and lifter kit for Chevrolet small block 283-305-327-350-400. P/N Camshaft 22213; Lifter B-0817. Kit includes Melling M-Select camshaft and lifters. Melling describes this cam as a Class II with fair idle and good low to mid-rande torque. Cam specs are as follows:
ADV. Duration (INT/EXH): 288 / 288
Duration @ .050" (INT/EXH): 214 / 214
Valve Lift (INT/EXH): .443 / .443
Lobe Centerline: 112
Power Range: 1700-5200
Please let me know the right springs to use on my LB9 heads
Thread
Thread Starter
Forum
Replies
Last Post
