350TPI Starting problem
Thread Starter
Junior Member
Joined: May 2008
Posts: 40
Likes: 0
From: UK
Car: 92' Z28
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.42
350TPI Starting problem
I’ve just bought 1992 Z28 with a 350TPI and 700R4 transmission. When I go to first start the car with the shifter in “Park” I turn the key, the dash lights come on and I just get a “clonk” sound and the engine doesn’t turn over. I found that taking the shifter out of park, in to neutral and then back into park the car starts fine? The battery is almost brand new and the car always starts, either first time or after I’ve taken it out of park worked the shifter back and forth.
Ideas please? I don’t think it’s the starter because the car has only done 35,000km!
Ideas please? I don’t think it’s the starter because the car has only done 35,000km!
Supreme Member
Joined: Jul 2005
Posts: 2,123
Likes: 0
From: North Central Mass.
Car: 1985 Berlinetta
Engine: Megasquirted TPI
Transmission: Transgo 700R4
Axle/Gears: 3.42
Re: 350TPI Starting problem
Sounds like the switch on the side of the shifter that allows it to start in park or neutral only.
Take the console apart, you will see the switch on the side of the shifter body. It has large purple wires running into it.
Take the console apart, you will see the switch on the side of the shifter body. It has large purple wires running into it.
Thread Starter
Junior Member
Joined: May 2008
Posts: 40
Likes: 0
From: UK
Car: 92' Z28
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.42
Re: 350TPI Starting problem
Cool thanks, I will take a look next time I use the car.
Thread
Thread Starter
Forum
Replies
Last Post
1989formula5.7l
DFI and ECM
1
Aug 15, 2015 11:35 AM
92camaroJoe
Tech / General Engine
6
Aug 13, 2015 06:07 AM





