im going the opposite way than most do withthese swaps.
i am planning on going from a computer controled carb to a tpi system,
am purchasing the complete setup tomorow, aside from a fuel puimp what else will i need, its going on a 305 H.O. that im putting into my sdime since my maro fell victim to the ice storm earlier this year. the setup is complete with all sensors, rails, injectors, harness and ecm. just trying to get my ducks in a row, so there is less cussin if any when i turn the key
also plannoing on using a comp xe270hr cam, any issues with the stock heads and wanting to use 15 intake and 1.6 exhauts rockers if poss

 

i did that once.. I thaught all i needed were some little things turned out I needed ALOT of stuff !!!!! and it cost WAY Too much ! I would never do that again .. I would just go and buy a car with that type of motor in it already cheap.

 

Try this, lot's of info there. http://www.v8s10.org/forum/viewforum...ec2d4d9b80b05b

 

thanks for the input guys i do owe you thanks

SDIME