trying to get an idea
Thread Starter
Junior Member
Joined: Apr 2009
Posts: 72
Likes: 0
From: hillsboro aka hillsburito Oregon
Car: 83 berlinetta
Engine: 305 roller motor
Transmission: th350
Axle/Gears: 10 bolt 3.08
trying to get an idea
hi all the folks at TGO I have a 83 camaro with a 305 from a 91 with the stock roller cam a torker intake and 350 1.94/1.50 heads if any one else has this setup or similar please reply with what kind of performance you have 
in advance p.s. berlinetta's don't always suck.
in advance p.s. berlinetta's don't always suck. 
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Who said Berlinettas always suck?
I don't have that particular set-up, but I have had a Torker intake and can say without reservation that it sucks. It really would on top of a stock cam 350 TBI engine.
I don't have that particular set-up, but I have had a Torker intake and can say without reservation that it sucks. It really would on top of a stock cam 350 TBI engine.
Thread Starter
Junior Member
Joined: Apr 2009
Posts: 72
Likes: 0
From: hillsboro aka hillsburito Oregon
Car: 83 berlinetta
Engine: 305 roller motor
Transmission: th350
Axle/Gears: 10 bolt 3.08
Re: trying to get an idea
i was thinking in terms of horse power numbers and throttle response drivability etc. etc.
Thread
Thread Starter
Forum
Replies
Last Post