need all the help I can get
Thread Starter
Junior Member
Joined: Oct 2009
Posts: 1
Likes: 0
need all the help I can get
my '89 RS, 2.8, turns over, but won't start. I had a mechanic friend come by and he brought his computer with. He put in the car info, but as soon as he plugged it in to the car the screen went blank. So, he checked for any fire the old way I had none. So, he told me to replace the Ign control module, I didand it still won't start. I have checked all the fuses (all that I could find) and all look fine. Any ideas?? Any and all help will be deeply appreciated. 
Senior Member
Joined: May 2008
Posts: 833
Likes: 0
From: London, Ont, Canada
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: need all the help I can get
You said your friend plugged in his OBD and it went blank!!!!
I'm thinking ECM is bad. Try grabbing one from the wreckers and put it in and see!
I'm thinking ECM is bad. Try grabbing one from the wreckers and put it in and see!
Senior Member
Joined: May 2008
Posts: 833
Likes: 0
From: London, Ont, Canada
Car: 87 T-Top GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: need all the help I can get
Hey, give this thread a GOOD look over!
https://www.thirdgen.org/forums/tech...art-story.html
https://www.thirdgen.org/forums/tech...art-story.html
