would this cam work for me??
Thread Starter
Supreme Member
Joined: Apr 2009
Posts: 2,852
Likes: 2
From: Scottsdale, AZ
Car: 89 GTA/93 S13/91 Si
Engine: 5.7 350 TPI
Transmission: 700R4
Axle/Gears: 3.23
would this cam work for me??
okay...my GTA is pretty much stock...its got dyno dons headers, msd cap and wires, and magnaflow exhaust. i wanted to get a more aggressive cam but i wanted to make sure im buying the right thing and this 
is the best place to ask 
so...heres the link//
http://www.summitracing.com/parts/CC...38-2/?rtype=10
oh! and will this increase hp? make it sound beefy-er? louder? what?
thanks,
Mikey
is the best place to ask so...heres the link//
http://www.summitracing.com/parts/CC...38-2/?rtype=10
oh! and will this increase hp? make it sound beefy-er? louder? what?
thanks,
Mikey
Senior Member
iTrader: (1)
Joined: Sep 2003
Posts: 988
Likes: 0
From: St. Louis, Missouri
Car: 1989 Firebird Formula
Engine: 383 Stealth Ram
Transmission: 700R4
Axle/Gears: 3.73 9 bolt Posi
Re: would this cam work for me??
If you have a stock L98 (350 TPI), then you have a roller cam. The cam in your link is a flat tappet. Do a search on here and see what others are running. Also if you have stock heads, they won't handle much lift so keep that in mind when selecting a cam.
Hope this helps.
Hope this helps.
Member
Joined: Jan 2010
Posts: 137
Likes: 0
From: San Antonio, TX
Car: 89 Formula/94 z28
Engine: Vortec 350/ LT1
Transmission: WC T-5/ 4l60e
Axle/Gears: torsion posi 3.23s/auburn posi323s
Re: would this cam work for me??
You can run the lt4 hotcam but with 1.5 rockers on the stock heads, just needs a lil tuning. decent sound with a good power increase. I ran the same cam in my 88 formy a while back
Senior Member
iTrader: (3)
Joined: Aug 2008
Posts: 614
Likes: 0
From: Memphis, TN
Car: 1992 z28 Purple Haze
Engine: 5.7L Tuned Port Injection
Transmission: 700R4
Axle/Gears: 3.23 both spinning
Re: would this cam work for me??
you can go to Comp Cams website and get a free download of a program called Camquest. Then just go in and plug in your specific information and the program will select a cam(s) based on the parameters you give it. Pretty helpful tool IMO.
Supreme Member
Joined: Jun 2006
Posts: 2,199
Likes: 1
From: West-Central
Car: 91 Trans am
Engine: built 360 TBI
Transmission: built 700r4
Axle/Gears: 10bolt/3.23
Re: would this cam work for me??
LT4 cam specs at the bottom of the post #1 https://www.thirdgen.org/forums/post...487-post1.html
Thread
Thread Starter
Forum
Replies
Last Post