Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

clicking sound on new 350 irregular pattern

Thread Tools
 
Search this Thread
 
Old Feb 28, 2010 | 09:56 PM
  #1  
matts86cam's Avatar
Thread Starter
Member
15 Year Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 208
Likes: 2
From: WI
Car: 1986 chevy camaro z28 coupe
Engine: crate 355
Transmission: 700r
Axle/Gears: 3.42
clicking sound on new 350 irregular pattern

swapped the 305 for a crate 355. I hear a clicking sound all the time when driving but its not clicking in a pattern, its random but frequent through all gears . When it clicks it feels like the car lunges a little like its getting more power and it revs a little higher, not enough to see it on the tach but you can hear it. It clicks once, sometimes twice sometimes 3 times every 4 or five seconds any ideas were to start?
Reply
Old Feb 28, 2010 | 11:05 PM
  #2  
matts86cam's Avatar
Thread Starter
Member
15 Year Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 208
Likes: 2
From: WI
Car: 1986 chevy camaro z28 coupe
Engine: crate 355
Transmission: 700r
Axle/Gears: 3.42
Re: clicking sound on new 350 irregular pattern

I am afraid I'll blow the engine up if I drive it and I need to get rolling down the highway again. I have searched TGO but I cant find anything similar to my problem. The exhaust manifold has a leak where it connects to the y-pipe and I plan on taking it to the shop but I need to figure out the pinging sound first.

Any suggestions on where to start?
Reply
Old Mar 1, 2010 | 03:42 PM
  #3  
Rolling Thunder's Avatar
Supreme Member
 
Joined: Mar 2008
Posts: 1,549
Likes: 1
From: CT
Car: 86 T/A, 83 Z/28
Engine: 5.0 TPI, 350 2 X 4 bbl
Transmission: 4 speed auto, 5 speed manual
Axle/Gears: 3.23 posi, 3.73 std
Re: clicking sound on new 350 irregular pattern

Is it a click or a ping? In your first post you called it a click in your second you called it a ping? My first and probably best guess check over your plug wires. When they arc to say a exhaust manifold they happened to be a little to close to it will click and cause some driveability issues on the cylinder until the problem clears. This can be seen usually at night where any arcs will show up as flashes. Unless its directly shorted to something then there will be no flash so still check over your wires for cracks and melted spots. Exhaust leaks can cause clicks too but dont really cause drive ability issues. If its a ping its a totally different story.
Reply
Old Feb 1, 2011 | 07:32 PM
  #4  
matts86cam's Avatar
Thread Starter
Member
15 Year Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 208
Likes: 2
From: WI
Car: 1986 chevy camaro z28 coupe
Engine: crate 355
Transmission: 700r
Axle/Gears: 3.42
Re: clicking sound on new 350 irregular pattern

Thanks for the reply, it was a melted plug wire arcing.
Reply
Old Feb 1, 2011 | 07:59 PM
  #5  
cuisinartvette's Avatar
Supreme Member
 
Joined: Feb 2006
Posts: 1,777
Likes: 27
From: Sanctuary state
Car: 67 ******mobile
Engine: 385 Solid roller
Transmission: T-56
Axle/Gears: 4.11
Re: clicking sound on new 350 irregular pattern

Good to hear you found it, was gonna say exhaust leak
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
B_Dubya
Transmissions and Drivetrain
3
Aug 26, 2015 05:09 PM
Eric-86sc
Engine/Drivetrain/Suspension Parts for Sale
0
Aug 24, 2015 09:01 PM
crazynights
Transmissions and Drivetrain
10
Aug 21, 2015 06:53 AM
sreZ28
Engine Swap
4
Aug 14, 2015 07:48 PM
gta power
Exhaust
1
Aug 13, 2015 06:15 AM




All times are GMT -5. The time now is 06:58 AM.