Ok folks. I read alot of posts on the egr code 32. The story is I replaced the egr valve, and the SES light went off as expected. The engine was running rough when idling at highway speed. So I removed the vacuum line attached to the top of the egr, and it ran like new again. So I read about putting a BB in the line and blocking it off. Car runs great, and SES light comes back on. So, I just removed the light. I know that I won't know about other SES codes, but I figure if it's roaring like a lion, don't worry about it. And, I don't have to block it off with a plate.