block is .60 over head gasket is stock
Thread Starter
Joined: Apr 2008
Posts: 128
Likes: 5
From: Vancouver,BC
Car: 91 camaro vert
Engine: 350,113heads,ccxfi260, slp shortys
Transmission: 700r4
Axle/Gears: 3.23s posi discs
block is .60 over head gasket is stock
I have a 350 bored .60 over and im using 113 heads with stock head gaskets that came in the felpro engine rebuild kit,my questions is will a stock gasket even work for this application can i modify it if it needs to match the bore or do i get a new one.
Senior Member
Joined: Jun 2005
Posts: 502
Likes: 0
From: Savannah GA
Car: 1986 IROC
Engine: 355" TPI
Transmission: 700R4
Axle/Gears: 3.42
Re: block is .60 over head gasket is stock
It should be fine. Most gaskets included with rebuild kits will accomidate common rebuild bore sizes.
Thread Starter
Joined: Apr 2008
Posts: 128
Likes: 5
From: Vancouver,BC
Car: 91 camaro vert
Engine: 350,113heads,ccxfi260, slp shortys
Transmission: 700r4
Axle/Gears: 3.23s posi discs
Re: block is .60 over head gasket is stock
Yea thats what i was thinking because the heads never changes so aslong as its matchd to that it should seal no matter what the bore on the block is,thanks for the help
Thread
Thread Starter
Forum
Replies
Last Post
NinjaNife
Tech / General Engine
27
Aug 23, 2015 11:49 AM
