Just wanted to Say thanks
Thread Starter
Junior Member
Joined: Jun 2010
Posts: 14
Likes: 0
Just wanted to Say thanks
About 2 weeks ago I posted some questions about timing, and why my truck was running like dog S!@#. Well its running great. I also needed some assistance on the oil pressure switch well turns out I had to retap the hole with 1/4 18 NPT thread and wala. Thank you guys so much for everyone who put there knowledge towards my questions. You guys are really gods over here. I will be going back over to the FSC forum.
thanks
Brian
89 K1500
thanks
Brian
89 K1500
Senior Member
Joined: Oct 2004
Posts: 965
Likes: 2
From: SE, Ohio
Car: '86 Z28, '91 RS
Engine: 305ci, 305ci
Transmission: TH200c (no kidding), TH700r4
Axle/Gears: 2.73, 2.73
Re: Just wanted to Say thanks
About 2 weeks ago I posted some questions about timing, and why my truck was running like dog S!@#. Well its running great. I also needed some assistance on the oil pressure switch well turns out I had to retap the hole with 1/4 18 NPT thread and wala. Thank you guys so much for everyone who put there knowledge towards my questions. You guys are really gods over here. I will be going back over to the FSC forum.
thanks
Brian
89 K1500
thanks
Brian
89 K1500
You are right this place is awesome. There is a wealth of knowledge behind the
button too. A few years ago this place was very busy but it's still quality just not as much going on. 
Thread
Thread Starter
Forum
Replies
Last Post
thefirebirdm@n
South Central Region
3
Sep 14, 2015 01:45 PM
