Do I need a key Chip without an ECM?
Thread Starter
Junior Member
Joined: Dec 2010
Posts: 9
Likes: 0
Do I need a key Chip without an ECM?
I am %100 sure that i'll lose my keys in the future. Before I pay $100 for another, couldn't I just get a key made without it? I am running a carbureted 350. Does anyone know if this will work?
Thanks!
Thanks!
Supreme Member
iTrader: (5)
Joined: Mar 2011
Posts: 2,893
Likes: 4
From: Central Texas
Car: GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: Aussie 9-bolt/3.27 posi
Re: Do I need a key Chip without an ECM?
Yes. The key chip is read by a separate unit, not by the ECM.
But you can also do a bypass for like easily under a dollar, unless you hafta to go buy a whole packet of resistors to get the ONE that you need. Got a friendly source for electronic components? Just need 1 resistor.
https://www.thirdgen.org/forums/elec...able-vats.html
But you can also do a bypass for like easily under a dollar, unless you hafta to go buy a whole packet of resistors to get the ONE that you need. Got a friendly source for electronic components? Just need 1 resistor.
https://www.thirdgen.org/forums/elec...able-vats.html
Thread
Thread Starter
Forum
Replies
Last Post
