Ok, i recently replaced the CTS and ICV, going to calibrate the TPS tomorrow, after checking for vacuum leaks numerous i found none, so i was looking at the injectors while my dad turned over the engine i noticed, when he turned the key it sprayed in a cone shape to prime the engine, then when it started idling it looked like it was dripping and then when he hit the gas it would spray in a cone shape but sputter and backfire, No SES light is on. I cracked open the injector pod to see good condition o-rings and screens on the injector. My TBI rebuild kit will be here tuesday and then im going to rebuild the TBI unit and perhaps its the FPR diaphragm. Does anyone have any ideas?