cam and head swap on a stock L98
Thread Starter
Junior Member
iTrader: (1)
Joined: Aug 2011
Posts: 9
Likes: 0
From: st paul MN
Car: 1989 gta
Engine: 5.7 ltr
Transmission: 700r4
Axle/Gears: 9 bolt 3.27 limited slip
cam and head swap on a stock L98
i was wondering what a good head and cam combo is for my stock L98.I have an 89 gta and i want more power without losing drivability i know i will be replacing the exhuast from the manifolds back and a new throttle body as well as intake and plenum but i dont wanna rebiuld the bottom half and i hope i wont have to put in new injectors or fuel pump.Any suggestions on a good cam and head combo and what will i need to build it right the car has 50,000 miles and i dont want to pull the motor out to make more power....
Senior Member
Joined: Jun 2011
Posts: 839
Likes: 4
From: Melbourne, Australia
Car: 1988 IROC Camaro (RHD)
Engine: 350 ci L98 SBC
Transmission: T700
Axle/Gears: 9 bolt BW, Disk, Posi-traction
Re: cam and head swap on a stock L98
Crane 2032 Camshaft.
Maybe a 2031 if you want something a fraction hotter.
Maybe a 2031 if you want something a fraction hotter.
Thread Starter
Junior Member
iTrader: (1)
Joined: Aug 2011
Posts: 9
Likes: 0
From: st paul MN
Car: 1989 gta
Engine: 5.7 ltr
Transmission: 700r4
Axle/Gears: 9 bolt 3.27 limited slip
Re: cam and head swap on a stock L98
thanx for the reply but i was wondering what the duration and lift of that cam. im having trouble finding that part number do you have a different part number for that as well
Thread
Thread Starter
Forum
Replies
Last Post
