Hey all so it's been a bit now and I got my car together wanted to know what u guys recamend. Its got a 1999 305 comp cams 520 540 lift 1.6 roller rockers 1.94 intake valves 64 cc vortec heads. rpm air gap vortec intake shorty edelbrock headers 3 inch Magnaflow exhaust 650 double pumper carb msd6al 6000 chip msd dist. Lakewood 70/30 front 50/50 rear umi pa hard bar and lower links edelbrock tork arm 10 bolt rear auburn posi 4.11 gears . Tires 215/60/15 front 275/60/15 mt et slicks rear . 700r 3000stall any hints on what times I could be looking at and any info from anyone to help my build would be much appreciated Ty

 

Really? From a truck?

With 64cc heads, you're going to be down on compression, and you've got a pretty healthy cam. But, probably enough stall to make up for it.

Probably mid/high 14's, I'd guess. Maybe low 13's with a perfect tune on a good day.

Best ways to improve would be a 100 shot, or a 350 shortblock.

BTW, not many people use the Edelbrock torque arm, and what I've typically seen of them around here is pictures of them broken.

 

Ty for the info been waiting all day