so i find myself rebuilding a 350 tpi in the iroc, posting this on here to see if Im missing something or if this setup sounds ok. first off 700r4 tranny with 2.77 rear gears. blocks getting bored .30 and going with flat tops, new true roller chain and high vol oil pump. next is the 083 heads, full port and polish and a three angle valve job not sure on rockers 1.5 or 1.6? port matching the intake. cam is extreme energy xr270hr biggest with stock converter that has a noticeable idle. last the msd ignition. and thats about all the money i got, lol. any thoughts or ideas on this, im up for anything... thanks guys