I have a 1982 Z28 I bought off of a friend, I'm having a problem tracing which wires run to the starter. Also, is there a way around the neutral safety switch, I'm not worried about starting it in gear, always cautious not to do that. Just looking for a way to get around that whole mess of wires. The previous owner put in a B&M megashifter, and basically junked the whole neutral safety wire harness.

Can anyone give me an idea of what color wires, and approx sizes of the wires that ran from the ignition to the starter.


This is what is coming out of the firewall: http://imgur.com/RIgtGyD

Here's a little closer to the starter area: http://imgur.com/dwl2STj

It's a three stud starter, 1 small stud on each side, and the large bolt in the middle where the 12v from the battery goes.

Any help would be greatly appreciated. Thank you!

 

My initial plan was to just install a push button and be done with it, but I'd like to keep it a little less easy to steal.