Where is this hose supposed to go? (pictures included)
#1
Junior Member
Thread Starter
Join Date: Jun 2012
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: Trans Am
Engine: 305
Transmission: TH350
Where is this hose supposed to go? (pictures included)
I have a 82 trans am. with 305 V8 and carburator (holley) and edelbrock intake manifold. Tried to fix some other things when i discovered this hose.
It is coming from the driver's side valve cover. Where should I connect it?
It is coming from the driver's side valve cover. Where should I connect it?
Last edited by kissedin; 05-12-2013 at 10:39 AM. Reason: it's the valve cover on the driver's side.
#2
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,110
Received 1,686 Likes
on
1,281 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Where is this hose supposed to go? (pictures included)
Air cleaner
It's the make-up air to replace what the PCV sucks out of the crankcase
It's the make-up air to replace what the PCV sucks out of the crankcase
#3
Junior Member
iTrader: (1)
Join Date: Nov 2012
Location: maine
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 z28 Iroc
Engine: 350 t76 turbo
Transmission: 700r4
Axle/Gears: 3:23
Re: Where is this hose supposed to go? (pictures included)
Not sure but I think it goes into the air cleaner. its part of the pcv system.
#4
Junior Member
Thread Starter
Join Date: Jun 2012
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: Trans Am
Engine: 305
Transmission: TH350
Re: Where is this hose supposed to go? (pictures included)
Thank you for quick replies. The thing is my air cleaner is from weiand. I don't recall seeing a place to connect a hose on it. Any suggestions on what to do? It looks like this:
#6
Junior Member
iTrader: (5)
Join Date: Feb 2013
Location: Roseville, Michigan
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Camaro Berlinetta
Engine: 350 bored and stroked
Transmission: 700R4
Axle/Gears: 3.73
Re: Where is this hose supposed to go? (pictures included)
I agree with Twin_Turbo, get rid of it! My buddy had one and it caught on fire, did some major damage.
#7
Junior Member
Thread Starter
Join Date: Jun 2012
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: Trans Am
Engine: 305
Transmission: TH350
Re: Where is this hose supposed to go? (pictures included)
hmmm.. that does not sound too good. any suggestions that will fit in my car and with my carb? (and that i can connect my loose pcb-valve hose to?
Thank you for all your help so far btw!
Thank you for all your help so far btw!
Trending Topics
#8
Member
Re: Where is this hose supposed to go? (pictures included)
Mine goes to the back of the carb or intake I can't remember. Anything with vacuum should work.
#9
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,110
Received 1,686 Likes
on
1,281 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Where is this hose supposed to go? (pictures included)
It doesn't get vacuum. It's make-up air.
Get that other thing off of your car!!!! It's a fire hazard waiting to happen. That's for cars that don't run, but all they do is sit around in parking lots in sq-in-of-chrome contests, for the 8-yr-olds to oooh and aaaah over. ABSOLUTELY NOT for engines that are actually started, and above all, NOT "performance" in any manner way shape or form.
Get that other thing off of your car!!!! It's a fire hazard waiting to happen. That's for cars that don't run, but all they do is sit around in parking lots in sq-in-of-chrome contests, for the 8-yr-olds to oooh and aaaah over. ABSOLUTELY NOT for engines that are actually started, and above all, NOT "performance" in any manner way shape or form.
#10
Supreme Member
Join Date: Jul 2007
Location: Howard Lake, MN
Posts: 1,293
Likes: 0
Received 4 Likes
on
4 Posts
Car: 86 Camaro
Engine: 355- hopefully a 5.3 this summer
Transmission: 700r4
Axle/Gears: 3.42
Re: Where is this hose supposed to go? (pictures included)
It doesn't get vacuum. It's make-up air.
Get that other thing off of your car!!!! It's a fire hazard waiting to happen. That's for cars that don't run, but all they do is sit around in parking lots in sq-in-of-chrome contests, for the 8-yr-olds to oooh and aaaah over. ABSOLUTELY NOT for engines that are actually started, and above all, NOT "performance" in any manner way shape or form.
Get that other thing off of your car!!!! It's a fire hazard waiting to happen. That's for cars that don't run, but all they do is sit around in parking lots in sq-in-of-chrome contests, for the 8-yr-olds to oooh and aaaah over. ABSOLUTELY NOT for engines that are actually started, and above all, NOT "performance" in any manner way shape or form.
try to find a stock V8 F body air cleaner..
#11
Junior Member
Thread Starter
Join Date: Jun 2012
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: Trans Am
Engine: 305
Transmission: TH350
Re: Where is this hose supposed to go? (pictures included)
#12
Junior Member
Thread Starter
Join Date: Jun 2012
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: Trans Am
Engine: 305
Transmission: TH350
Re: Where is this hose supposed to go? (pictures included)
A thought that striked me;
would a stock fbody filter fit with my holley 600 carb?
Maybe this is a good alternative?
http://www.ebay.com.au/itm/EDELBROCK...11900a6&_uhb=1
Thank you for all your help. This forum is a great help for me.
would a stock fbody filter fit with my holley 600 carb?
Maybe this is a good alternative?
http://www.ebay.com.au/itm/EDELBROCK...11900a6&_uhb=1
Thank you for all your help. This forum is a great help for me.
#13
Member
Re: Where is this hose supposed to go? (pictures included)
A thought that striked me;
would a stock fbody filter fit with my holley 600 carb?
Maybe this is a good alternative?
http://www.ebay.com.au/itm/EDELBROCK...11900a6&_uhb=1
Thank you for all your help. This forum is a great help for me.
would a stock fbody filter fit with my holley 600 carb?
Maybe this is a good alternative?
http://www.ebay.com.au/itm/EDELBROCK...11900a6&_uhb=1
Thank you for all your help. This forum is a great help for me.
As for the element size I believe Holley is 5.125" where the cleaner comes to the carb. Any element that meets that requirement would work.
#14
Junior Member
Thread Starter
Join Date: Jun 2012
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: Trans Am
Engine: 305
Transmission: TH350
Re: Where is this hose supposed to go? (pictures included)
Ok. Now it's replaced. Bought a 14" edelbrock aircleaner with 3" filter. First i thought it would be to tall, but measured and now everything is in place and running. Thank you for all your help!
#15
Member
iTrader: (1)
Join Date: Apr 2013
Location: Colorado
Posts: 107
Likes: 0
Received 4 Likes
on
2 Posts
Car: 83 Camaro Z28 (CFI)
Engine: 305 V8 (CFI)
Transmission: 700R4
Axle/Gears: 3.73
Re: Where is this hose supposed to go? (pictures included)
Im thinking of deleting mine that goes to the air cleaner. Good or bad ? Can i just put a breather filter there in its place ?
#16
Supreme Member
Join Date: Jul 2009
Location: Kitchener, ON
Posts: 2,327
Likes: 0
Received 7 Likes
on
5 Posts
Car: 1988 GTA
Engine: LB9
Transmission: T5
Axle/Gears: 3.45
Re: Where is this hose supposed to go? (pictures included)
Bad idea, if you leave it open the engine will suck dusty air into it. Using a breather/filter would be ok.
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Engine/Drivetrain/Suspension Parts for Sale
0
08-12-2015 11:33 AM