KEY WON'T TURN it's stuck in the lock position
Thread Starter
Senior Member
Joined: May 2013
Posts: 604
Likes: 29
Car: 1986 Camaro IROC Z
Engine: LB9 305 TPI
Transmission: 700R4
KEY WON'T TURN it's stuck in the lock position
When I put my key in the ignition it will not turn, It is stuck in the lock position. My car is all the way in park, my foot is on the brake and it will not turn. I have been fighting with it all day, and I have tired turning the steering wheel and that has done nothing. What could be the problem?
Junior Member
Joined: Aug 2009
Posts: 12
Likes: 0
From: Ontario, Canada
Car: 84 camaro Z28 LG4
Engine: 305 LG4
Transmission: 5 spd BW
Axle/Gears: stock
Re: KEY WON'T TURN it's stuck in the lock position
If it's not stuck because of the steering wheel cranked over too far it's probably your key is worn down or the cylinder itself. Sometimes cutting a new key from the old one can help.
Last edited by Snoopywasaga; Jun 11, 2013 at 06:38 PM. Reason: can't read.
Supreme Member
Joined: Jul 2007
Posts: 1,293
Likes: 6
From: Howard Lake, MN
Car: 86 Camaro
Engine: 355- hopefully a 5.3 this summer
Transmission: 700r4
Axle/Gears: 3.42
Re: KEY WON'T TURN it's stuck in the lock position
grab the column right by where it goes under the gauge cluster- the outside part actually turns a little bit as some sort of a pointless safety interlock mechanism with the shifter..
Thread Starter
Senior Member
Joined: May 2013
Posts: 604
Likes: 29
Car: 1986 Camaro IROC Z
Engine: LB9 305 TPI
Transmission: 700R4
Re: KEY WON'T TURN it's stuck in the lock position
Looks like it was the wheel, I kept fighting with it and finally got it to come lose. I have driven the car several more times with no more key problems.
Thread
Thread Starter
Forum
Replies
Last Post
