Ok I'm in the process of putting a goodwrench 350 in my 1992 Camaro RS. I'm about to put the alternator/power steering bracket back on but I have lost the bolts that go on the bracket. I know the hole sizes for all 4 holes the middle and lower part of the bracket are 3/8 X16, what I need to know is the length of the bolt that goes in the middle top hole and the lower bottom hole. I looked in the Camaro service manual and it shows that the middle lower hole and the upper lower hole of the bracket had a threaded stud going in the block and the other threaded end had a nut going on it that was coming out of the bracket. I need to know the length of the threaded studs as well. Thanks