Exhaust wire looms
Thread Starter
Junior Member
Joined: Jan 2012
Posts: 59
Likes: 0
From: Brisbane, Australia
Car: 87 Z28
Engine: 5.0 LG4
Transmission: 4L60 (Built)
Axle/Gears: 3.23 Eaton TrueTrac
Exhaust wire looms
Anyone know what the thread size is for the wire loom holders that bolt into "G" are? I bought some Moroso wire looms and they didn't come with bolts 
Supreme Member
Joined: Dec 2005
Posts: 9,916
Likes: 883
From: 53.0907° N, 113.4695° W
Re: Exhaust wire looms
1/4"-20.
I have the Moroso looms as well.
It was necessary to clearance the header (in my case). I also made a spacer (out of 5/16" nut) to stand the loom away from the head as it's needed to clear the header.
I made the installation a little and used a socket head cap screw as opposed to a conventional hex head bolt.
I have the Moroso looms as well.
It was necessary to clearance the header (in my case). I also made a spacer (out of 5/16" nut) to stand the loom away from the head as it's needed to clear the header.
I made the installation a little and used a socket head cap screw as opposed to a conventional hex head bolt.
Thread
Thread Starter
Forum
Replies
Last Post
eightsixseven
Tech / General Engine
2
Dec 16, 2024 01:50 PM
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
Street Lethal
Power Adders
634
Apr 30, 2019 12:14 PM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM