Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

wont idle cold

Thread Tools
 
Search this Thread
 
Old Jul 15, 2014 | 07:51 PM
  #1  
darrell_43748's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2011
Posts: 18
Likes: 0
From: ohio
Car: 1992 camaro rs
Engine: 3.1 v6 MFI
Transmission: 5 speed
Axle/Gears: poss rear end
wont idle cold

i have a 92 camaro 3.1 v6 car wont idle cold have to keep giving it gas until it gets hot then it will idle. has all new injectors. new idle control sensor . new wires and plugs, new map sensor, whole new distributor. new fuel pump o2 sensor. anyone help
Reply
Old Jul 17, 2014 | 12:33 PM
  #2  
darrell_43748's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2011
Posts: 18
Likes: 0
From: ohio
Car: 1992 camaro rs
Engine: 3.1 v6 MFI
Transmission: 5 speed
Axle/Gears: poss rear end
Re: wont idle cold

anyone have any ideas
Reply
Old Jul 17, 2014 | 03:01 PM
  #3  
tyeo098's Avatar
Member
 
Joined: Jun 2014
Posts: 180
Likes: 0
From: Chantilly, VA
Car: 88 Chimera
Engine: 1994 LO5 5.7L
Transmission: 700R4
Axle/Gears: 2.73...?
Re: wont idle cold

SEL?

Codes?
Reply
Old Jul 17, 2014 | 04:42 PM
  #4  
darrell_43748's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2011
Posts: 18
Likes: 0
From: ohio
Car: 1992 camaro rs
Engine: 3.1 v6 MFI
Transmission: 5 speed
Axle/Gears: poss rear end
Re: wont idle cold

no codes displayed
Reply
Old Jul 30, 2014 | 02:04 PM
  #5  
darrell_43748's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2011
Posts: 18
Likes: 0
From: ohio
Car: 1992 camaro rs
Engine: 3.1 v6 MFI
Transmission: 5 speed
Axle/Gears: poss rear end
Re: wont idle cold

anyone have any idea's
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GeneralIesrussi
Carburetors
6
Jun 20, 2024 07:21 PM
IROCtometal
TPI
2
Sep 20, 2015 11:08 PM
IROCtometal
TPI
3
Sep 9, 2015 10:01 AM
Jk_Under
Tech / General Engine
1
Sep 8, 2015 08:13 AM
IROCtometal
TPI
0
Sep 2, 2015 02:01 PM




All times are GMT -5. The time now is 01:58 AM.