Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Car won't start

Thread Tools
 
Search this Thread
 
Old Jul 18, 2015 | 12:50 PM
  #1  
mikef123's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2010
Posts: 1
Likes: 0
From: carmel, ny
Car: 1991 T/A
Engine: 5.0 305 TPI
Car won't start

I have a '91 TA 5.0 TPI. Car is bone stock original.
Always has run great the 5 years I've owned it.
Recently it sat for about 6 weeks without being started. Now I'm having all sorts of problems starting her up. Battery is fully charged. When I turn the key to the on position the drivers side fan comes on and the service engine light just keeps flashing. Car cranks but won't catch. When I try and pull codes, car won't even go in to diagnostic mode. Service engine light just keeps blinking. No code 12 or anything. Just keeps blinking. Any ideas? Does the fact that it won't go into diagnostic mode mean that ecm is bad? Any help would be appreciated!
Reply
Old Jul 18, 2015 | 02:41 PM
  #2  
rusty vango's Avatar
Supreme Member
 
Joined: Jun 2011
Posts: 2,036
Likes: 5
From: knoxville tn
Car: 86 IROC
Engine: 5.0 TPI
Transmission: 700-R-4
Axle/Gears: 2.73 open
Re: Car won't start

Originally Posted by mikef123
I have a '91 TA 5.0 TPI. Car is bone stock original.
Always has run great the 5 years I've owned it.
Recently it sat for about 6 weeks without being started. Now I'm having all sorts of problems starting her up. Battery is fully charged. When I turn the key to the on position the drivers side fan comes on and the service engine light just keeps flashing. Car cranks but won't catch. When I try and pull codes, car won't even go in to diagnostic mode. Service engine light just keeps blinking. No code 12 or anything. Just keeps blinking. Any ideas? Does the fact that it won't go into diagnostic mode mean that ecm is bad? Any help would be appreciated!
that would be the place to start . according to the FSM
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
midge54
LTX and LSX
21
Dec 27, 2019 04:14 PM
Brcharrelson
TPI
15
Aug 26, 2015 07:47 PM
justin57
TBI
30
Aug 20, 2015 07:05 PM
ZsTransAm
Electronics
1
Aug 11, 2015 07:30 PM
killer777
Tech / General Engine
0
Aug 8, 2015 02:47 PM




All times are GMT -5. The time now is 11:04 PM.