Knock sensor help
05-15-2018, 05:07 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2018
Location: Nsw australia
Posts: 33
Received 0 Likes
on
0 Posts
Car: 1992 z28
Engine: 305 tpi
Transmission: Auto
Knock sensor help
Hi
So im starting to gather up all the parts i need to swap the 305 tpi in my 92 camaro to an sp383 delux crate engine with a satin first tpi intake useing the EBL P4 flash ecm. Im totaly stumped by the knock sensor and and what i need for the new set up. I dont know much about them and have been on google for ages trying to find out about them. Is there anyone out there that can tell me the exact one to get?
cheers in advance
cheers in advance
05-15-2018, 06:36 AM
#2
Member
iTrader: (2)
Join Date: Nov 2013
Location: Freehold NJ
Posts: 297
Received 0 Likes
on
0 Posts
Car: 87 Iroc 5.7,67 SS Camaro,90 Formula
Engine: 355 AFR Superram LPE 219
Transmission: 700r4 3000 stall 4spd 5 spd
Axle/Gears: 3.27
Re: Knock sensor help
They are different from 305 to 350 and I think they are different for the speed density cars if i'm not mistaken. I think the ohms are different. I'm guessing you would need a 350 knock sensor since it is the same bore. The esc(spark control module)for 350 is different from a 305 too.
Thread
Thread Starter
Forum
Replies
Last Post
86TpiTransAm
Tech / General Engine
14
11-17-2001 12:50 PM
IH8Fords
Tech / General Engine
2
07-23-2000 02:49 PM