383 stroker build
Thread Starter
Junior Member
Joined: Nov 2018
Posts: 9
Likes: 0
383 stroker build
I am starting to build a 383 and before i start to buy and put everything together i have done a lot of research but i am kind of at a stand still.
To start off I am having a machine shop do the shortblock and i have a pair of headers and decided on having TrickFlow Super23 195cc.
I am also keeping the tpi on the car beacuse I want to retain the factory look. AND YES I know its going to strangle the engine.
Now the heads i picked out have 1.470 springs and the cam i have been looking at is the Comp Cams XR288HR because I like the idle of it
Now my questions are would that cam work with my car and how streetable would it be because it is a daily driver
And what would be some rough estimates of the HP/TQ that I would be making
To start off I am having a machine shop do the shortblock and i have a pair of headers and decided on having TrickFlow Super23 195cc.
I am also keeping the tpi on the car beacuse I want to retain the factory look. AND YES I know its going to strangle the engine.
Now the heads i picked out have 1.470 springs and the cam i have been looking at is the Comp Cams XR288HR because I like the idle of it
Now my questions are would that cam work with my car and how streetable would it be because it is a daily driver
And what would be some rough estimates of the HP/TQ that I would be making
Thread
Thread Starter
Forum
Replies
Last Post
