Fuel pump replacement question
Thread Starter
Junior Member
Joined: Jun 2020
Posts: 20
Likes: 0
From: MD
Car: 1987 Chevrolet Camaro
Engine: 2.8L v6
Transmission: Automatic
Fuel pump replacement question
I’m gonna attempt to replace the fuel pump and sending unit on my 87 camaro v6.
What sizes are the rubber fuel hoses that connect the fuel lines on the sending unit to the ones on the car? I believe there’s 3 of them (plus the one with the flare nuts) but I haven’t been able to find any info anywhere online.
Thanks for any info
What sizes are the rubber fuel hoses that connect the fuel lines on the sending unit to the ones on the car? I believe there’s 3 of them (plus the one with the flare nuts) but I haven’t been able to find any info anywhere online.
Thanks for any info
Joined: May 2008
Posts: 416
Likes: 82
From: Viersen, Germany
Car: 85 Iron Duke, 88 GTA and 92 TA
Re: Fuel pump replacement question
One of them (to the fuel filter) isn't replacable alone, it's part of the short hardline to the filter. Original PN was #10038113, but it has been discontinued around 2011.
The hoses to the return and to the purge hard line are standard 5/16"x25 hoses, the one to the UFO valve is a standard 3/8"x25 hose.
The hoses to the return and to the purge hard line are standard 5/16"x25 hoses, the one to the UFO valve is a standard 3/8"x25 hose.
Thread
Thread Starter
Forum
Replies
Last Post
Zerocyde
Tech / General Engine
18
Jan 8, 2025 01:25 PM
GreenCamaro13
Engine/Drivetrain/Suspension Wanted
1
Feb 5, 2012 01:30 PM